Mold Release

KM822 240 Volt 17.5" x 22" Cone 10

Regular Price: $1,950.00


Skutt KM-822 Electric Kiln

Perfect Small Studio Kiln– Easy to Load  

Part of the New 22” Series, the KM822 offers 4.5” more height then the KM818. This doesn’t sound like much until you need to add another shelf or want to fire a taller pot or sculpture. Fire a 18” tall piece with all the proper clearances. The 22” height coupled with its Cone 10 capability and small space requirements make it a perfect kiln for the home studio.It comes equipped with the precise control of the KilnMaster Controller making it easy and convenient to operate. 

Also available in model KM822-3 with energy saving brick.

  1. $0.00 - $9.99 (3)
  2. $10.00 and above (4)

Mold Release

Release agents, pails, accessories

7 Item(s)

  • Ease Release Aerosol Mold Agent 12oz

    Regular Price:

    Ease Release Aerosol Mold Agent 12oz
  • Ease Release 2831 for use with FlexFoam

    Regular Price:


    Ease Release 2831 for use with FlexFoam

    Ease Release 2831

    is a wax-based non-silicone liquid release agent. It has proven to be effective when used to release polyurethane foams. This wax dispersion is designed to operate at mold temperatures ranging from 160°F to 200°F with minimal wax build-up. EASE RELEASE 2831 works with aluminum, steel, and elastomeric mold construction.


    Product Specifications
    AppearanceHazy Liquid
    Solids6 – 7%
    • Excellent release
    • Non-silicone
    • Contains no chlorinated or CFC solvents
    • Low wax build-up

    Ease Release 2831 provides

    • Excellent release
    • Excellent surface finish
    • No build-up on mold surfaces
    • Reduced mold maintenance and down time
    • Greater productivity


    At temperatures above 500°F, fumes are evolved which, if inhaled, can cause flu like systems. Use with adequate ventilation.


    1. Clean molds with Mold Cleaner 2508, for a clean mold surface prior to preparing the molding surface.
    2. Heat the mold to operating temperature.
    3. Apply a coat of EASE RELEASE 2831 with a spray or brush and allow too dry.
    4. Rub EASE RELEASE 2831 into mold surface with a clean cloth.
    5. Repeat two or three times to seal the mold surface.
    6. Start molding and reapply a light coat of EASE RELEASE 2831 after each molding cycle.


    Thorough cleaning of molded parts with Isopropyl Alcohol may be required prior to staining, painting, or bonding. For suggested cleaning procedures, consult your Mann technical representative.

    Ease ReleaseWeight
    Solvent CarrierDrying RateFlammableWetting Quality
    Ease Release 28316.0#Petroleum HydrocarbonsMediumYesExcellent
  • Smooth-On Mixing Container 32oz

    Regular Price:

    Smooth-On Mixing Container 32oz
  • Smooth-On Mixing Container 64oz

    Regular Price:

    Smooth-On Mixing Container 64oz
  • E-Pox-EE Kleener 16oz

    Regular Price:

    E-Pox-EE Kleener 16oz
  • Sonite Wax Quart

    Regular Price:

    Sonite Wax Quart
  • Super Seal Liquid Sealer Pint

    Regular Price:

    Super Seal Liquid Sealer Pint

7 Item(s)