Talc AMTAL C-98 American 50bgs/pallet


Regular Price:

  • Buy 50 for $0.22 each and save  55%
  • Buy 500 for $0.19 each and save  62%
  • Buy 1000 for $0.18 each and save  63.6%
  • Buy 2000 for $0.17 each and save  66%
Talc AMTAL C-98 American 50bgs/pallet
  • TALC AMTAL C-98 3Mgo4Sio2h2o (TALC) is a flux for low and high fire glazes. It gives slight opacity and acts like magnesium in large amounts. Often a body flux in low fire. Minimum order quantity is 10 lbs. Was Pioneer 2882

    Description and Applications

    AMTAL C-98 is a white-firing talc that is ideal for
    traditional, refractory and technical ceramic applications.
    Traditional applications include:

    • Wall and Floor Tiles
    • Tableware
    • Sanitaryware
    • Electrical Insulators
    • Porcelain
    • Hobbyware

    Typical Chemical Analysis

    • Si02--53.5 %
    • MgO--29.5 %
    • CaO--3.5%
    • Al20 3--• Fe203--• Ti02• K20• Quartz
    • Loss On Ignition - 1000°C10%-12%

    As a flux in high alumina ceramics, Sanitary ware and
    dinnerware, AMTAL C-98 produces less porous bodies
    at lower temperatures.

    AMTAL C-98 can also be used in technical ceramics
    where it functions as the major silicate material
    replacing clays and feldspars in lower grade alumina
    products such as steatite ceramics and low-expansion
    cordierite materials.
    AMTAL C-98 can also be used as an economical source

    Typical Physical Properties
    • Passing 200 mesh sieve 98 %
    • Passing 325 mesh sieve 89%
    • Specific Gravity 2.8 glee
    • Free Moisture • Fired Brightness 88 +
    • Fired Shrinkage 0.4%

    Analysis of American Talc products by TEM, SEM, PLM and EDX has
    consistently verified that there are no asbestiform minerals present
    American Talc Company

    PO Box 1048
    Van Horn TX 79855
    Phone: 432 283 2330
    Fax: 432 283 2569
    The information and data presented herein is based on testing and research given in good
    faith and believed to be accurate. Natural mineral products are subject to normal variations
    related to the natural deposit from which they are mined. The user is responsible for
    determining the performance suitability for their process and their products/production
    needs. American Talc does not warrant the results and disclaims all liability for any
    inaccuracies or omissions, or for any direct, special, indirect or consequential damages or
    losses of whatever kind resulting from any causes, or from products and information
    mentioned on this product data sheet. Customers' uses of these talc products must comply
    with the MSDS and all other applicable environmental, health and safety regulations.

  • Write A Review For Talc AMTAL C-98 American 50bgs/pallet

    How do you rate this product? *

    • Quality