PMC3 Scientists at the Mitsubishi laboratory in Japan have developed a new material they call PMC3. It is similar to PMC+ in consistency, shrinkage and strength. The primary difference is in its firing temperature which is significantly lower than the other versions. PMC3 can be fired at three time/temp settings: 10 minutes at 1290 F (700 C) 20 minutes at 1200 F (650 C) 30 minutes at 1110 F (600 C.) You can use PMC3 with all types of silver-clay and it can be fired up to 1650F and held for up to 2 hours.
WARNING: This product can expose you to chemicals including Silica, crystalline (airborne particles of respirable size), which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.