Kiln FireFly 120 Volt with PYROMETER ^10

Kiln FireFly 120 Volt with PYROMETER ^10
In Stock Now0 OR

Introducing the Paragon FireFly Kiln

<!--img style="height: 245px; width: 190px" border="1" hspace="2" alt="photo of kiln" vspace="2" src="" align="left" />

The portable and convenient Paragon FireFly will give you unbridled freedom. It plugs in almost anywhere on a household 120 volt outlet. Take this kiln to seminars or on vacation.
The firing results will thrill you. Create breathtaking glass bracelets and pendants in the 8" square x 4 1/2" high interior. Fire small glass casting molds and even drop molds. But you are not limited to glass. Fire porcelain or stoneware pendants and beads. Test glazes. The kiln has plenty of power to reach 2350 degrees F.
The Paragon FireFly is an excellent choice for beginners. It fires rapidly. Fuse glass in minutes. Yet you can also slow it down with the infinite control switch. The pilot light glows brightly during firing.
Enjoy digital accuracy on a modest budget: Watch the kiln temperature on the hand-held, easy-to-read digital pyrometer, which is included at no extra charge. The pyrometer will help you determine the cooling rate of difficult glazes or know when to begin monitoring glass. It takes the guesswork out of firing.
<!-- The reliable hand-held pyrometer weighs only 5 ounces and measures in degrees F up to 1999F. (Please note: If you fire hotter than 1999 F, you will need a pyrometer that reads higher temperatures.) The liquid crystal display is easy to read even in bright daylight. Replace the Type-K thermocouple in seconds with a simple plug-in connection.
The Paragon FireFly is made of durable 2 1/2" thick insulating firebrick, which stores heat for slow cooling and safe annealing of smaller glass projects. The solid 2 1/2" thick firebrick top and bottom help seal in the heat.
To strengthen the firing chamber, the firebrick corners are fitted together like fine furniture with L-shaped notches. This type of joint lasts longer than the butted joint and the "picture frame" mitered joint found on competitive brands.
Dropped, recessed grooves protect the replaceable heating elements for longer life. Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns. Rugged construction makes this kiln a little workhorse.
The hinged lid is self-adjusting to compensate for expansion at high temperatures. The hinge includes a stop that holds the lid open and out of the way. Lift the lid with a handle on the front or a separate handle on the side.
A built-in 3" tall steel base with mar-proof rubber feet supports the entire firebrick bottom. Place the kiln directly onto a heat-resistant work surface. No extra stand is needed.
A stainless steel heat shield inside the switch box protects wiring from contact with the case. Costly nickel-plated copper wiring is covered with high temperature glass-braided insulation. Louvers on the top, side, and bottom of the switch box circulate air for the long life of the electrical components while keeping dust inside the box to a minimum.

The Paragon FireFly ships by convenient UPS.
Electrical: 120 volts, 14 amps, 1,680 watts, 5-15R receptacle
Interior: 8" square x 4 1/2" high, .16 cu. feet
Exterior: 15" wide x 18 1/2" deep x 12" high (The 3" tall built-in stand is included in the exterior height.)
The 1/4" pyrometer hole is drilled in the hinge side of the kiln.
Maximum temperature: 2350 F   Pyrometer: Reads up to 1999 F Shipping Weight: 45 lbs.
The firng results will thrill you. Create breathtaking glass bracelets and pendants.
This Product is safe to use for everyone.