Create permanent connections between fired metal clay pieces without having to use solder and a torch. Clay-Bond™, a metal alloy powder, becomes a paste when mixed with water and acts like a solder/adhesive for metal findings.
Use a brush with short, stiff bristles to apply the paste to the two metal pieces you want to join. The binder ingredients in Clay-Bond dry in minutes, holding firmly to prevent the pieces from moving or separating before and during firing.
Arrange joined pieces in a small-size firing pan, embedded in activated carbon. During firing, the Clay-Bond creates a strong, permanent connection anywhere it was applied. Each jar contains 10 grams of powder.
WARNING: This product can expose you to chemicals including Silica, crystalline (airborne particles of respirable size), which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.